hidden supports
 

 

MULTIPLE LEG OPTIONS

Works with our adjustable legs or standard 2" pipe and auger.

 

IMPROVED
RIGIDITY

Stringer brackets are extra large to eliminate flex.

 

ACCESSORY
MOUNT

Open end design to accommodate accessories.

 

ADJUSTABLE WIDTH

Accommodates docks from 32" to 51" wide.

 

ADJUSTABLE LEGS

Eight sizes of legs
accommodate water depths from 0" to 85". Locking design allows for infinite height adjustment.

 

WELDED FOOT PAD

Large 6" x 6" pad, welded for stability.

 
hidden supports
WATER DEPTH TOP ASSEMBLY LEG (two required)
0" to 7" SHTA14 SHLEG1
4" to 13" SHTA19 SHLEG1
10" to 25" SHTA19 SHLEG2
22" to 37" SHTA19 SHLEG3
34" to 49" SHTA19 SHLEG4
46" to 61" SHTA19 SHLEG5
58" to 73" SHTA19 SHLEG6
70" to 85" SHTA19 SHLEG7
standard supports
standard supports image
  • Will support any dock configuration.
  • Augers offer the most rigid support and can be used in any bottom condition.
  • The posts can be used for mooring lines or accessories such as flag poles.
  • Best for deep water or muddy bottom.
  • Pipe offered in 2" Aluminum, 2" HD Aluminum, or 2" Gatorshield™ Galvanized Steel. Allied Gatorshield™ is American made with triple layer zinc Flo-Coat® to provide four times the rust and corrosion protection of ordinary galvanized steel.

 

POSTS

Augers and Bottom Plates are not included.
LENGTH STEEL ALUMINUM HD ALUMINUM
2' 2P2S 2P2A n/a
3' 3P2S 3P2A n/a
4' 4P2S 4P2A n/a
5' 5P2S 5P2A n/a
6' 6P2S 6P2A 6P2AHD*
7' 7P2S 7P2A 7P2AHD*
8' 8P2S 8P2A 8P2AHD*
9' 9P2S 9P2A 9P2AHD*
10' 10P2S 10P2A 10P2AHD*
12' 12P2S 12P2A 12P2AHD*
16' 16P2S n/a 16P2AHD*
20' 20P2S n/a 20P2AHD*
* HD Posts require Composite Auger AUGP

CROSSARMS and DIAGONALS

LENGTH STEEL ALUMINUM
2' Crossarm 2X2S 2X2A
3' Crossarm / Diagonal 3X2S 3X2A
4' Crossarm / Diagonal 4X2S 4X2A
6' HD Crossarm 6XHD1S n/a
8' HD Crossarm 8XHD1S n/a
9' HD Crossarm 9XHD1S n/a
12' HD Crossarm 12XHD1S n/a
3' 3" Crossarm 3390X25 3390X2A
4' 3" Crossarm 4390X25 4390X2A
6' 3" HD 90° Crossarm 6390XHD1S n/a
8' 3" HD 90° Crossarm 8390XHD1S n/a
Longitudinal Leg Brace n/a SHDIAG

PARTS

Auger composit auger Small Bottom Plate Large Bottom Plate Mud Auger Stringer Bracket

ALUMINUM
AUGER

COMPOSITE AUGER SMALL BOTTOM
PLATE
LARGE BOTTOM
PLATE
MUD AUGER

STRINGER
BRACKET
  • used to auger post into the lake bottom
  • fits 2" HD aluminum pipe
  • can be used in place of auger when bottom is hard sand or gravel
  • can be used in place of auger or with auger in soft conditions
  • used to auger posts into mud or soft bottom
  • attaches dock to crossarm
  • holds 2 sections of dock together
Post Socket Post Ratchet Crossarm Clamp tee connector diagonal clamp
POST SOCKET POST RATCHET CROSSARM
CLAMP
TEE
CONNECTOR

DIAGONAL
CLAMP

  • gives the rigidity of an augered post
  • socket augers permanently to lake bottom
  • standard support assemble slides easily into socket
  • makes yearly installation and removal simple and quick
  • speeds up the installation of posts that use augers
  • attaches crossarm to vertical post
  • another way of making a “T” or “L”
  • stronger than adapter, but uses an extra support assembly
  • clamps on the crossarm of one dock and the side of another
  • used to make support more rigid in deep water
  • available in 3', 4' and 6' lengths

 

truss supports divider
Trusses
  • 18" high all aluminum truss to build patios or dock platforms.
  • Easy to install lightweight.

 

LENGTH PART NUMBER
4' XT4
6' XT6
8' XT8
9' XT9
9' 10" (use 2 for a 20' Truss) XT910
12' XT12
16' XT16
Truss Connector (connects 2 Trusses) XTC
Dock to Platform Connector (2 pieces) DP
Truss Stringer Bracket XTSB